• nybjtp

CJ-D20 2p 1.2ka 20ka Fais Fab Hluav Taws Xob Hluav Taws Xob Tiv Thaiv SPD Arrester

Lus piav qhia luv luv:

Kev tsim kho thiab Feature

  • Qhov chaw siv: Sub-Distribution Boards
  • Hom Kev Tiv Thaiv: LN, N-PE
  • Kev ntsuas siab: Hauv = 10kA (8/20μs)
  • IEC / EN / UL Qeb: Chav Kawm II + III / Hom 2 + 3
  • Cov ntsiab lus tiv thaiv: Siab Zog MOV thiab GDT
  • Housing: Pluggable Design
  • Ua raws li IEC 61643-11: 2011 / EN 61643-11: 2012

Product Detail

Khoom cim npe

Technical Data

IEC hluav taws xob 75 150 275 320 385 440
Nominal AC voltage (50/60Hz) 60v ua 120 V 2 30v 2 30v 2 30v 400 V
Maximum Nruam Ua Haujlwm Voltage (AC) (LN) Uc 75v ua 150 V 275v ua 320v ua 385v ua 440v ua
(NPE) Uc 255v ua
Nominal Discharge Tam sim no (8/20μs) (LN)/(NPE) In 10kV/10kA
Tshaj tawm tam sim no (8/20μs) (LN)/(NPE) Imax 20 kA / 20 kA
Voltage Protection Level (LN)/(NPE) Up 0.2 kV / 1.5 kV 0.6 kV / 1.5 kV 1.3 kV / 1.5 kV 1.5 kV / 1.5 kV 1.5 kV / 1.5 kV 1.8 kV / 1.5 kV
Ua raws li qhov ntsuas cuam tshuam tam sim no (NPE) Yog 100 ARMS
Teb Sijhawm (LN)/(NPE) tA <25ns/<100ns
Backup Fuse (max) 125A gL/gG
Short-Circuit Current Rating (AC) (LN) ISCCR 10 kA
TOV Withstand 5s (LN) UT 90v ua 180 V 335v ua 335v ua 335v ua 580v ua
TOV 120 min (LN) UT 115 V 2 30v 440v ua 440v ua 440v ua 765v ua
hom Ua siab ntev Ua siab ntev Safe Fail Safe Fail Safe Fail Safe Fail
TOV Nrog 200ms (NPE) UT 1200 V
Kev khiav hauj lwm qhov kub thiab txias -40ºF txog +158ºF [-40ºC txog +70ºC]
Permissible khiav dej num Ta 5%… 95%
Atmospheric siab thiab qhov siab RH 80k Pa..106k Pa/-500m..2000m
Terminal Ntsia Hlau Torque Mmax 39.9 lbf-hauv [4.5 Nm]
Tus neeg xyuas pib hla ntu (max) 2 AWG (Solid, Stranded) / 4 AWG (Flexible)
35 mm² (Tshuaj, Stranded) / 25 mm² (Flexible)
Mounting 35 hli DIN Rail, EN 60715
Qib Kev Tiv Thaiv IP 20 (ua-hauv)
Khoom siv tsev Thermoplastic: Extinguishing Degree UL 94 V-0
Kev Tiv Thaiv Kub Yog lawm
Lub Xeev Ua Haujlwm / Fault Indication Ntsuab ok / Liab defect
Cov Chaw Tiv Thaiv Chaw Taws Teeb (RC) / RC Hloov Muaj Peev Xwm xaiv tau
RC Tus neeg xyuas pib hla ntu (max) AC: 250V / 0.5A; DC: 250V / 0.1A; 125V / 0.2A; 75V / 0.5A
16 AWG (Solid) / 1.5 mm2 (Solid)

Surge Protection Device (1)

 

Dab tsi yog Surge Protective Device (SPD)?

Surge Protective Device (SPD) yog ib feem ntawm kev tiv thaiv hluav taws xob.Cov cuab yeej no txuas rau tib lub sijhawm rau lub zog hluav taws xob ntawm cov khoom thauj uas nws yuav tsum tau tiv thaiv.Cov cuab yeej tiv thaiv surge redirects hluav taws xob tam sim no zoo li nominal tawm tam sim no los ntawm luv luv Circuit Court.Nws ua li ntawd yog siv ib qho kev sib cuag nrog lub xeev lossis qhov hloov pauv huab cua.Tsis tas li ntawd, cov cuab yeej tiv thaiv surge ua hauj lwm ua ib qho kev ruaj ntseg shutoff ntaus ntawv rau overcurrent tej yam kev mob thiab ib tug recloser uas tswj lub voltage theem saum toj no lub rated voltage los yog tsawg voltage nyob rau hauv cov kev tshwm sim ntawm ib tug txhaum.Peb kuj tuaj yeem siv cov cuab yeej tiv thaiv surge ntawm txhua theem ntawm cov khoom siv hluav taws xob.Txoj kev no feem ntau yog qhov tseem ceeb tshaj plaws uas siv thiab ua tau zoo tshaj plaws ntawm kev tiv thaiv overvoltage.

Surge tiv thaiv ntaus ntawv txuas nrog nyob rau hauv parallel nta ib tug siab impedance.Nyob rau hauv lwm yam lus, cov sum ntawm series impedance yog sib npaug zos rau impedance ntawm ib tug surge tiv thaiv ntaus ntawv.Thaum lub sij hawm overvoltage tshwm nyob rau hauv lub system, lub ntaus ntawv impedance txo, yog li surge tam sim no yog tsav los ntawm lub surge tiv thaiv ntaus ntawv, bypassing cov khoom rhiab heev.Qhov ntawd yog los tiv thaiv cov cuab yeej tiv thaiv overvoltage transients thiab cuam tshuam, xws li voltage spikes thiab hluav taws xob surges, zaus variations, thiab over-voltages tshwm sim los ntawm switching hauj lwm los yog xob laim.Thaum tus neeg siv nruab ib lub surge strip los yog ib tug surge tiv thaiv ntaus ntawv mus rau hauv ib lub hwj chim kab los ntawm lub hwj chim utility uas muaj xws li smoothing capacitors, surge suppressors tsis tsim nyog vim hais tias cov capacitors twb tiv thaiv los ntawm tam sim ntawd hloov nyob rau hauv voltage theem.


  • Yav dhau los:
  • Tom ntej:

  • Sau koj cov lus ntawm no thiab xa tuaj rau peb